What we do differently.

The job of a fan is to move air against a certain pressure. There are always multiple fan profiles of a particular fan diameter that can get a job done. However, only one fan profile can do the job most efficiently. For FRP fans, aerodynamic fan profiles are made from molds through a hand lay-up processes. Each profile requires a separate mold and making new molds costs money and time. Therefore, fan manufacturers generally have a maximum of 2 molds per fan diameter. In layman terms this means that, for a particular fan size, the blades come in a maximum of 2 different shapes. This holds true for all fan manufacturers.

Except us.

Impact does a thorough analysis of every problem statement and always gives the most effective air-movement solution. Even if that means bearing the brunt of an added cost and making a new mold profile. Our decision to do so stems from our core business philosophy. We are our product. And our product is a tool to save energy and money for our customers. Our revenue and/or profits might give us joy but what really gets us out of bed in the morning is our 99% customer satisfaction rate.

Welcome to Impact Cooling Solutions. We are confident we can satisfy your air movement needs.

Posted in Blog

Air Cooled Heat Exchangers

Heat Exchanger is a device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix, nor the fluids are in direct contact. Fans are used to generate the air that transfers the heat, hence fans are an essential part of heat exchangers. It is very important to select a suitable fan according to the application of the heat exchanger and ‘Parag’ has developed a range of fans particularly for heat exchanger application.

Posted in Home

Cooling Towers

Mechanically forced-draft or induced-draft cooling towers are used to remove the heat absorbed in the circulating cooling water systems. The Fan is a very important component of the cooling tower. Available Sizes: 2 Feet to 40 feet ( 600 mm to 12,000 mm) Number of Blades: 4 to 12 Static Pressure: Up to 1 inch of WG (25 mm) Air Flow: Up to 30,00,000 CFM (1420 m^3 / sec) Fan RPM: Up to 1440 Operating Temperature Range: – 40ºC to 120ºC Features & Benefits FRP FAN: FRP Impelle.

Posted in Home

Tea Withering

Tea Withering is the process by which tea leaves are withered. Withering reduces the moisture content in the leaves from 70-80% to about 50% and the leaves become limp and flaccid, suitable for rolling. Fans are essential in this process for the air to be blown in the trough. ‘Parag’ Fans has developed high efficiency FRP Impellers to reduce the proper amount of moisture from the leaves while still maintaining the taste and fragrance. Available Sizes: 2 feet to 6 feet

Posted in Home

Industrial Ventilation & Exhaust

Industrial Ventilation is a method of controlling airborne toxic chemicals or flammable vapors by exhausting contaminated air away from the work area and replacing it with clean air.PARAG has developed wide range of FRP Impellers to suit Industrial Ventilation & Exhaust Applications. Available Sizes: 2 feet to 6 feet ( 600 mm to 1800 mm) Number of Blades: 4 to 16 Static Pressure: Up to 4 Inches of WG (100 mm) Air Flow: Up to 1,00,000 CFM ( 47 m^3 / sec ) Fan RPM:

Posted in Home

Mine Ventilation

Mining is the extraction of valuable minerals or other geological materials from the earth. Any material that cannot be grown from agricultural processes or created artificially in a laboratory or factory, is usually mined. Fans are the most important component of any mine ventilation system as they generate the amount of air flow required to clear toxic fumes while creating enough pressure to do so. Available Sizes: 2 Feet to 16 Feet ( 600 mm to 4,877 mm) Number of Blades: 4

Posted in Home